Filter
Top Products
Cleaning
• Make sure that the plug is pulled out.
• Wait until the deep fryer is completely cool
before cleaning.
• Wait for 1 to 2 hours after use before using
again to avoid burns.
• Unlock the frying fat vessel by pulling out the
control element upwards. Pour out the oil.
• Clean the control element in the housing with
a damp cloth and household detergent if
necessary. Do not immerse in water.
• The lid, frying basket and frying fat vessel
can be cleaned in the usual manner in soapy
water.
• Avoid using abrasive materials or sharp ob-
jects. These may damage the deep fryer.
Troubleshooting
• Check the mains connection.
• Check the position of the thermostat.
Other possible causes:
The device is fitted with a safety switch.
This prevents the heater being switched on
accidentally.
Troubleshooting:
Check that the control element is correctly in
place.
Overheating Protection
• If you should accidentally switch on your
deep fat fryer when there is no oil or fat in it
the overheating protection is automatically
turned on. The appliance is no longer ready
to be used. Unplug the deep fryer.
• Only after the device has been left to cool
down completely should the RESTART button
on the rear of the control element be oper-
ated in order to use the deep fat fryer again.
Please use a pointed object for this purpose.