Mellerware 27250 Electric Steamer User Manual


  Open as PDF
of 5
 
After selecting the desired cooking program, press “START/OFF” to begin cooking while the clock •
counts down and the indicator is on. When “00:00” displays on the LCD, the steam cooker will
“beep” four times, with the indicator light flashing to indicate that cooking is complete.
If the “8” program is selected, you can manually set your desired time according to your food •
requirements. Select program “8” , press “START/OFF”, the LCD will flash “0”. Press “+” to set the
time. Press “–” to reduce the time. Once set, press “START/OFF” to start cooking and the clock will
begin to count down.
In the “00:00” position on the LCD, press “PROG” to program the cooking. While the flashing “0” •
displays on the LCD, press “+” to set the time, press “–” to set the flashing “0” position. After set the
time, press “PROG” again to enter desired cooking program. Once selected, press “START/OFF”
and then the clock begins to count down.
MW_27250 SteamC IM.indd 4MW_27250 SteamC IM.indd 4 2/17/2009 11:10:08 AM2/17/2009 11:10:08 AM
 previous