Mellerware 27700A Fryer User Manual


 
1.Do not allow the cord to come into contact with any
rough, sharp or hot surfaces.
2.Do not pull or tug on the cord to remove the plug
from the wall socket. Switch off the unit on the
control dial and at the wall socket, then firmly grip
the plug to remove from the wall socket.
3.Do not use the cord or plug to carry or transport the
appliance, even for a short distance. The appliance
has 2 carry handles for this purpose.
4.The appliance will get hot during use. Switch off and
remove the plug from the wall socket, then allow
the appliance to cool down fully before cleaning or
placing in storage.
5.Only use the supplied components when using the
appliance. If a different cord, connector or lid is
used, the warranty and manufacturer’s liability will be
rendered null & void.
6.The lid is constructed out of glass, please handle the
lid with care to ensure that remains intact.
7.Do not remove the connector while the appliance is
switched on or in use. Switch off the appliance as
stated in the above instructions.
8.This appliance should not be used outdoors or for
industrial or professional purposes.
USING THE FRYING PAN
*APPLY SOME COOKING OIL TO THE PAN BEFORE
USE *
1. PLUG THE UNIT IN:
a. Plug the adjustable temperature controller
into the plate socket.
b. Connect the plug directly into the wall socket, never
use plug adaptors or extension leads with this
product.
2. TEMPERATURE SETTING:
THERMOSTAT SETTINGS
1- 90°C
2- 120°C
3- 150°C
4- 170°C
5- 195°C
Turn dial to the desired temperature and the indicator
light will illuminate.
3. START COOKING:
a. The pilot light will switch off when the plate
reaches the selected temperature.
b. For your reference, it takes about 8 minutes to reach
the required temperature on setting No. 5.
4. AFTER USE:
a. Switch the adjustable temperature controller to the
OFF position, and unplug the unit from the wall
socket.
b. Once the unit has cooled down to room temperature,
remove the temperature control unit from the pan.
5. CLEANING:
a. Before cleaning ensure the unit has been
unplugged from the wall socket, the adjustable
temperature control unit has been removed from the
pan and the pan has cooled down to room
temperature.
b. Use a damp cloth with some dish washing liquid
to clean the cooking surface. Ensure that it is a soft
cloth that will not damage the non-stick layer.
c. Use a soft dry cloth to clean the outside of the
unit.
d. Never use a scourer or any abrasive material when
cleaning the pan as it will damage the non-stick
surface.
d. If the power supply cord is damaged it must be
replaced by the manufacturer, its service agent or
similarly qualified person in order to avoid a hazard.
Read all instructions before use.
Save these instructions for further reference
SPECIFICATIONS:
ELEC. SPEC.
Please check the rating label indicated
on the product.
DIMENSIONS:
Size:30cmx30cm / depth 6cm
TEMPERATURE RANGE :
90 C ~ 195 C (1-2-3-4-5 scale)
CORD LENGTH:
100cm
VOLTAGE :
AC230V ~ 50Hz 1500W
ACCESSORIES
Extension cord with adjustable tempreature
controller……… 1 PC
Glass Lid……… 1 PC
27700A_IM.indd 3 2012/10/30 09:25:10 AM