Mellerware 2 4 1 0 2 Convection Oven User Manual


  Open as PDF
of 6
 
AUTOMATIC CENTERING GUIDES
1. Lowering the toasting lever closes the centering guides, and holds the bread or toaster food centrally
in the toasting slots.
Note: The toasting lever(s) will not lock down unless the Toaster is plugged into a 220-240V AC electrical outlet.
TOASTING INSTRUCTIONS
1. Make sure crumb tray is pushed all the way into the back of the Toaster and the toasting levers are in
the UP position.
2. Make sure no bread or other objects are inside the toasting slots. Place Toaster on a flat, level, heat
resistant surface.
3. Plug the power cord into a 220-240AC electrical outlet.
4. Position the browning selector knob to desired setting(s). To test toasting times for browning, it is
best to use both toasting slots’ position the browning selector know be tween (3) and (4) medium;
then adjust each subsequent toasting to your preference.
5. Remove all protective wrappings from food before placing into the toasting slot(s).
6. Insert bread or toaster food into the toasting slot(s). Lower the toasting lever until locked into place.
The automatic centering guides hold food upright for uniform side-to-side toasting. When the bread
is lowered into position, toasting will begin.
NOTE: The toasting lever will not lock into position unless the Toaster is plugged into a 220-240V AC
electrical outlet.
NOTE: When toasting a single slice, the bread may be placed in any toasting slot.
NOTE: To prevent a fire hazard, never place bread over the opening of the Toaster, always place bread
into the slots.
NOTE: DO NOT change the browning selector knob selection during the toasting cycle. First press the
CANCEL button; then turn the browning selector knob to adjust the browning lever. Lower the toasting
lever and toast until the desired toast color is achieved.
7. When the toast reaches the selected browning lever, it will pop up automatically.
8. Remove bread from toasting slot(s). Use care when removing bread as the bread and the top of the
Toaster will still be hot.
9. To interrupt toasting, press the corresponding CANCEL button.
10.Unplug cord from wall outlet when not in use.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage the
heating element or cause injury.
24102_IM.indd 5 2011/03/08 11:07:55 AM
 previous