Mellerware 3 3 0 0 1 Hot Beverage Maker User Manual


  Open as PDF
of 6
 
DESCALING
Always ensure that the kettle is disconnected from
the mains before descaling. Scaling or furring
is a common problem in hard water areas. It
is recommended that a propriety descaler be
used whenever scale deposits build up. The
instructions supplied with the descaler must
always be followed. Scale build up may result
in the kettle switching off before boiling. Using a
water purifier will help to reduce scale build-up.
Ensure that you descale your filter at regular
intervals to avoid impairing the pouring
performance of your kettle.
Cleaning and Maintenance
•Alwaysdisconnecttheplugfromthemains
before cleaning the kettle and base. Wipe the
kettle and base with a moist cloth. Never use
an aggressive scourer, steel wool of strong
chemical cleaners.
•Descalethekettleregularly.Thiswilldependon
the hardness of the water and the frequency of
use. Scale build up will significantly reduce the
heating efficiency of the kettle.
•Useofaproprietarydescalerforkettlesis
recommended. Follow the instructions provided
carefully.
Disposal and the Environment
If your electrical appliance requires replacement
or is of no further use, please think of
protecting the environment. Contact you local
authority for advice as many have facilities for
environmentally safe disposal
SERVICE
Before returning your product for service or repair
– check the following:
•Yourhouseholdmainssupplysocketisworking
properly.
•Themainssupplycircuitisnotoverloaded.
•Thereisnoscaleontheelementplate.
If service becomes necessary within the
guarantee period the appliance should be
returned to the retail outlet where purchased
or carefully packed and marked “fragile-handle
with care“ and sent carriage paid to the address
below. (Postage is not refundable) Service
outside the guarantee period is still available but
this will be chargeable.
 previous next