Filter
Top Products
3
English
Assembly and Use
Remove all packaging materials before using the rst time.
Before using the Hand Blender, wipe the Motor Body with a clean, damp cloth
and dry thoroughly. Handle carefully; wash each individual accessory item (Shaft,
Chopper Bowl, Mixing Cup, Whisk and Frother) in soapy water or the upper rack
of dishwasher. Do not put Chopper Cover or Adapter in the dishwasher. Wash
these items with damp cloth or rinse with soapy water. Do not use a scouring pad to
clean plastic materials to reduce scratching. Dry thoroughly before use.
Attach accessory component(s) to Motor Body by holding the Motor Body rmly in
one hand and insert tip into accessory item then twist 1/4 turn until locked. Dots will
be aligned indicating locked position. See Fig. 2.
You are now ready to use your hand blender. Grasp Motor Body rmly and plug
into 120 V~, 60Hz outlet.
To activate blender, set desired speed. Hold Motor Body rmly with one hand
and base of mixing cup with the other. Use nger to press desired control
button, either Turbo or Variable speed pulse. See Fig. 3
Do not operate the appliance for more than 15 seconds at a time and let cool
completely before next use.
See “Tips and Hints” section for further details on use or contact our Customer
Service by phone 1-800-288-4545 or online at www.nesco.com.
1.
2.
3.
4.
5.
6.
7.
Twist to
Lock. Dots
will align.
Turbo
Control
Variable
Control
Fig. 2
Fig. 3
On/Off
Control