Filter
Top Products
To clean the underside of the filter, the
flap must be opened:
^ Pull back the yellow clip to do this.
^ Rinse all parts under running water,
using a nylon brush if necessary.
^ Then close the flap so that the clip
engages. Important: After cleaning
make sure that the clip has properly
engaged.
^ Replace the filter combination so that
it lies flat in the base of the wash cab-
inet.
^ Secure the filter by turning the handle
in a clockwise direction.
,
Take care when you are fitting
the filter combination that it is se-
cured in position correctly. Other-
wise coarse soil could get into the
circulation system and cause a
blockage.
Cleaning and care
39