Miele 09 968 240 Ventilation Hood User Manual


 
Cleaning and care
18
WARNING: TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
Befor
e cleaning or servicing the
hood, disconnect it from the power
supply, see "IMPORTANT SAFETY
INSTRUCTIONS".
Stainless steel housing
General
The surfaces and control buttons are
susce
ptible to scratching and
chipping.
Observe the following cleaning
instructions.
Cle
an all surfaces and control
buttons using warm water and liquid
dish soap only, applying the mixture
with a sponge cloth.
Make sure that no water gets into
the in
terior of the hood.
Only use a damp cloth to clean the
ho
od, especially in the control panel
area.
Aft
er cleaning, dry the surfaces with a
soft cloth.
Avoid the following:
Cleaners containing soda, acid or
chloride, or cleaners containing
solvents
Abrasive cleaners such as scouring
powder, scouring liquid, abrasive
sponges such as pot scourers, or
used sponges that still contain
residues from abrasive cleaners
Special instructions for stainless
st
eel surfaces
(does not apply to control buttons)
S
tainless steel surfaces can also be
cleaned using a non-abrasive
stainless steel cleaner, available from
Miele.
T
o prevent the surfaces from quickly
becoming dirty again, we
recommend treating them with a
stainless steel care conditioner.
Apply sparingly over the entire area
using a soft cloth.
Special instructions for RAL color
finish housing
(special order)
Obser
ve the general cleaning
instructions contained in this chapter.
Minor scratches on the surface are
inevitable when cleaning the housing.
Depending on the lighting in the
kitchen, this may negatively affect the
app
liance's appearance.