Filter
Top Products
Building in the appliance
^
Feed the electricity connection cable
through the cut-out and connect.
^
Place the gas hob in the prepared
cut-out.
^
Make the gas connection (see
relevant section).
Securing the appliance
KM 371 G / KM 391 G
^ Secure the gas hob at the front and
rear with fixing brackets a supplied
as shown.
KM 370 G / KM 370-1 G / KM 390 G
^ Secure the gas hob at the front with
fixing brackets a and rear with fixing
brackets b supplied as shown.
Tighten the screws until seal c sits
flush with the worktop.
Installation
13