Problems water intake/drain
Issue Possible fault Solution
The "Intake/Drain"
indicator flashes then
lights alternately.
The water supply is
closed.
Open the water supply all the
way.
The dishwasher
stops running and
the "Intake/Drain"
indicator flashes.
Before fixing the fault:
–
Turn the dishwasher off s.
Fault in the water
intake.
–
Open the water supply all the
way.
–
Clean the water intake filter,
see "User Maintenance
Instructions".
– The water pressure at the
water connection is lower than
4.35 psi. Consult a plumber.
Fault in the water
drain.
There may be water in
the wash cabinet.
– Clean the triple filter.
– Clean the drain pump and the
non-return valve.
See "User Maintenance
Instructions" for more information
on the above.
–
Remove any kinks in the drain
hose.
Frequently asked questions
30