![](http://pdfasset.owneriq.net/2/a8/2a8dceff-dae8-41e9-9a7a-6d4c5eef4b8c/2a8dceff-dae8-41e9-9a7a-6d4c5eef4b8c-bg2c.png)
a Spring clamps
b Spacer bars
c Gap between spacer bar and worktop
d Sealing strip
The illustration shows a worktop cut-out with spring clamps a and spacer bars b
for 3 appliances.
An additional spacer bar is required for each additional appliance. The position
for securing each additional spacer bar will depend on the width of appliance B
(288 mm / 380 mm / 576 mm).
Installation of several appliances
44