Filter
Top Products
Product and Cut-out Dimensions Page 2 of 4
CS 1326 Y Tepan Yaki CombiSet
Cut-out Dimensions
For two CombiSet Appliances
Cut-out Dimensions
For three CombiSet Appliances
CS
1326
Y
Tepan
Yaki
CombiSet
For the installation of two appliances the
width of the countertop cut-out D is the sum
of A and C.
For the installation of three appliances the
width of the countertop cut-out D is the sum
of A and B and C.
A, B and C = appliance width
11 5/16” or 15”
(288 mm or 380 mm)
minus 5/16” (8 mm) to allow for the overhang
D = width of the countertop cut-out
If more than three appliances are being
installed, you will need to add, A, B or C for
each additional appliance.
Sample calculations for a countertop cut-out for three appliances
A
appliance width
minus 5/16"
(8mm)
B
appliance width
C
appliance width
minus 5/16"
(8mm)
D
countertop
cut-out
11" (280 )
11 5/16" (288 )
11" (280 )
33 3/8" (848 )
11"
(280
mm
)
11
5/16"
(288
mm
)
11"
(280
mm
)
33
3/8"
(848
mm
)
11" (280 mm) 15" (380 mm) 14 5/8" (372 mm) 40 5/8" (1032 mm)
14 5/8" (372 mm) 11 5/16" (288 mm) 11" (280 mm) 37" (940 mm)
14 5/8" (372 mm) 15" (380 mm) 14 5/8" (372 mm) 44 1/4" (1124 mm)
Location codes
2 – Support bars (Accessory, Item - 27996029D CSZL 1500 (Includes cover ))
Notes
All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS
02212012