Miele CVA 4066 Coffeemaker User Manual


 
The coffee/espresso is not hot enough.
Possible fault Solution
Were the supply lines and cup
pre-heated?
The temperature is set too low.
Check if the brew unit is clogged.
The smaller the cup, the more
important it is to pre-heat.
Check on what temperature range the
coffee type is set.
Clean the brew unit.
No drink is prepared although the beans were grinded and enough water is
in the container.
Possible fault Solution
The grind control is set to the finest
or the amount of coffee is set to the
maximum.
The process is timed, the process
might need so long, there is no time
for brewing any more.
Adjust the grind control slide to a
different position, or the amount of
coffee more or less.
The door cannot be closed.
Possible fault Solution
Check if all containers are properly
inserted.
The door hinges need to be
adjusted.
See "Installation Instructions".
The steam heating system is turned off but steam can still dispensed.
Steam can be dispensed as long as the steam heating system is heated. Once it
has cooled, steam can only be dispensed once the steam system has heated.
Frequently asked questions
57