Filter
Top Products
Filter operating hours
counter [
The number of hours the cooker hood
has been in operation is stored in
memory.
The Grease filter symbol [ or the
Charcoal filter symbol will light up to
tell you that the filters need to cleaned
or changed.
See "Cleaning and care" for further
information about cleaning and
changing the filters and resetting the
operating hours counters.
Altering the grease filter operating
hours counter [
You can set the operating hours
counter for the grease filter to suit the
type of cooking you do.
– Select a short time if you roast or fry
a lot.
– If you use very little fat for cooking,
select a longer time.
–
If you only cook occasionally, we still
recommend selecting a short time
because grease which has built up
gradually over a long period of time
will harden on the filter and make
cleaning more difficult.
The grease filter operating hours
counter is set at the factory for
30 hours. This can be lengthened or
shortened. You can choose 20, 30, 40
or 50 hours.
^
Switch the fan off by pressing the
On/Off button K.
^
Press the Run-on option button
5 ¢15 and the operating hours
button [ on the control panel on
the cooker hood at the same time.
The Grease filter symbol [ of the
operating hours button and one of the
fan power levels will flash.
Fan power level indicator lights 1 to IS
show the time set:
1........................20hours
2........................30hours
3........................40hours
IS .......................50hours
^ Press the – symbol to select a shorter
operating time or the + symbol to
select a longer operating time.
^
Confirm your selection by pressing
the operating hours button [.
All the indicator lights will go out.
If you do not confirm within 4 minutes,
the cooker hood will automatically
revert to the original setting.
Operation
17