Filter
Top Products
Remote control
The surface should be wiped with a
damp cloth only. Only use a damp cloth
as water could get into the unit and
cause damage.
Replacing the battery
The remote control uses one 3 V, CR
2032 battery.
Only use a battery of the type
quoted above.
Rechargeable batteries must not be
used.
The battery needs to be replaced if you
can no longer use the remote control to
select cooker hood functions.
The battery should also be replaced if
the indicator light on the remote control
unit no longer lights up or only lights up
very dimly when you press one of the
buttons.
You will still be able to use the control
panel on the cooker hood to select
functions.
^
Use a suitable screwdriver to undo
the two screws on the back of the
remote control unit and remove the
cover.
^ Take out the battery and replace it
with a new one, making sure the
polarity is correct.
^ Dispose of the used battery in your
recycling bin.
Cleaning and care
25