Filter
Top Products
a 1 exhaust connection
for exhaust ducting C 150 mm.
b 1 reducing collar
for exhaust ducting C125 mm.
c 1 non-return flap
for fitting into the exhaust socket on
the motor unit (only for air extraction
mode).
d 2 brackets
to support the appliance in the wall
unit.
e 1 spacer strip
to conceal the gap between the rear
of the appliance and the wall.
f Conversion kit for recirculation
mode
including exhaust grille and flexible
aluminium hose with clips (the
conversion kit is not supplied with the
cooker hood but is available as an
optional accessory; see "Technical
data").
g DML 300 installation kit (optional
accessory)
contains hinging and screws for
fixing a lightshield to match kitchen
furniture (lightshield not supplied with
cooker hood)
12 screws 3.5 x 16 mm
for securing the cooker hood into the
wall unit.
8 screws M4 x 12 mm
for securing the cooker hood to the
brackets.
4 of the screws can be used instead of
the plastic rivets to secure the spacer
strip.
2 screws4x30mm
for securing the cooker hood at rear
wall (only for Australia).
4 plastic rivets
for securing the spacer strip to the
back of the appliance.
Installation
19