Filter
Top Products
a 2 hose clips
to secure the vent ducting to the vent
connection.
b 2 runners
(1 x right, 1x left) to support the hood
in the cabinet.
c 1 spacer strip
to conceal the gap between the rear
of the appliance and the wall.
d Installation kit for recirculation
mode
contains air outlet grille and hose (not
supplied with the hood, optional
accessory)
e Installation kit DML 300 to install a
custom panel
contains retractable brackets and
screws (not supplied with the hood,
optional accessory)
8 screws 3.5 x 16 mm
to anchor the ventilation hood in the
cabinet.
8 screws M4 x 12 mm
to anchor the ventilation hood at the
runners.
4 screws could be used (alternatively to
the plastic rivet) to fix the spacer bar.
2 screws4x30mm
to anchor the ventilation hood at rear
wall.
4 plastic rivets
to connect the space bar with the
appliance rear wall.
Installation
25