Filter
Top Products
^ Assemble the tower. Place the flange
plate of the tower onto the ceiling
plate in such a way that the spring
clips click into the slots securely.
^
Screw the flange plate securely to the
ceiling plate with the four M6 nuts
supplied.
^
Shorten the electrical connection ca
-
ble as much as possible and secure
inside the cooker hood tower with the
cable clips.
Before connecting the appliance
read the safety notes in "Warning
and Safety Instructions" and in the
"Electrical connection" section.
^ Finally, push the cover plate upwards
until the spring fixing clips click in se-
curely and the plate sits tightly up
against the ceiling.
^
Before using the appliance for the
first time take the grease filter out and
remove the protective foil from the fil
-
ter frame. Then replace the filter.
Installation
29