Miele DA 220-2 Cooktop User Manual


 
Before any cleaning or maintenance
work the cooker hood must be dis
-
connected from the mains supply.
Ensure that:
– it is switched off at the fused spur
connection unit, or
– the mains fuse is withdrawn, or
– the screw-out fuse is removed (in
countries where this is applicable).
Housing
Warning: The surfaces and control
switches are susceptible to scratches
and abrasion. Please observe the fol-
lowing cleaning instructions.
^ All external surfaces and controls can
be cleaned using warm water with a
little washing up liquid applied with a
soft sponge.
^ Wipe dry using a soft cloth.
Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
^
Glass surfaces can be cleaned using
a proprietary cleaning agent for glass.
Avoid:
cleaning agents containing soda, ac
-
ids or chlorides,
abrasive cleaning agents e.g. pow
-
der cleaners or cream cleaners,
abrasive sponges, e.g. pot scourers or
sponges which have been previously
used with abrasive cleaning agents.
These will damage the surface.
Stainless steel
Stainless steel surfaces can be cleaned
using a proprietary non-abrasive clean
-
ing agent designed specifically for use
on stainless steel.
To help prevent resoiling, proprietary
conditioning agents for stainless steel
can also be used.
Apply sparingly with an even pressure.
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
Part Number 98013530, which is suit-
able for cleaning surfaces such as
stainless steel, glass, plastic and
chrome.
Stainless steel coloured controls
These controls may suffer discolour-
ation or damage if soiling is left on
them for too long.
Remove any soiling straight away.
Do not use stainless steel cleaning
agents on these types of controls.
If you are unsure about a particular
product or need further advice
please contact your nearest Miele
Sales office. See back page for
address.
Cleaning and care
17