Filter
Top Products
a Control panel
b Joystick
This is used to operate the fan settings
and the lighting.
c Hob lighting
d Charcoal filters
Special accessory for recirculation
mode
DA 2250, DA 2270: 2 filters
DA 2210: 4 filters
e Grease filters
f Fan setting indicator lamps
g Touch control for the run-on
option
To activate the run-on option. The fan
can be set to continue running, and to
switch off automatically after either 5 or
15 minutes.
h Touch control for the grease filter
The indicator lamp for the grease filters
lights up when the grease filters need
to be cleaned.
The touch control is used to reset the
operating hours counter every time the
grease filters are cleaned (see
"Cleaning and care").
It can also be used to check and alter
the operating hours counter.
i Touch control for the charcoal
filter
The indicator lamp for the charcoal filter
lights up when the charcoal filters used
in recirculation mode needs to be
replaced. For this to happen, the
operating hours counter needs to be
activated before the appliance is used
for the first time.
The touch control is used to reset the
operating hours counter every time the
charcoal filters are replaced (see
"Cleaning and care").
It can also be used to check and alter
the operating hours counter.
For information about using the
appliance, see "Operation".
Guide to the appliance
11