Filter
Top Products
^
Bolt the flange firmly to the ceiling
using the four M6 nuts.
^
Shorten the power cable as much as
possible and attach it to the terminal
block inside the chimney. See
"Electrical data".
Before connecting the appliance
read the "Important Safety
Instructions" and "Electrical data"
sections.
^
Finally, being careful not to scratch
the chimney, push the cover plate
upwards until the spring fixing clips
click into place. If installed correctly,
the cover should be secure and flush
against the ceiling.
^
Before using the appliance remove
the grease filter and remove the
protective film from the filter frame.
Insert the filter.
Installation
28