Filter
Top Products
a 3 protective shields
prevent scratches to the chimney dur
-
ing installation.
b Upper retaining plate secures the
chimney extension.
c Middle retaining plate for addi
-
tional stability of the chimney.
d 2 hose clips for securing the
ducting.
e 1 reducing collar
for use with 5" (125 mm) exhaust
ducting.
f 1 non-return flap for vented air
extraction only.
Caution: During the installation pro-
cess, please be careful of sharp
edges that can cause harm.
5 large headed screws 5 x 40 mm
for securing the retaining plates and the
canopy.
(S8 wall anchors included in the pack
-
aging are not for use in USA / CDN.)
2 screws 5 x 60 mm for securing the
chimney.
6 screws 3.5 x 9.5 mm for securing the
canopy and filter housing
1 lever for dismantling the chimney and
changing the light bulbs
Installation instruction sheet
Installation accessories
23