Filter
Top Products
The cooker hood is operated by pulling
out and pushing in the deflector plate.
To switch the fan on
^
Pull out the deflector plate.
The fan will begin to operate at setting II.
The On/Off indicator lamp and the 2nd
– / + power level indicator lamp will
light up.
If the cooker hood has been
connected to a window contact
switch via the Miele DSM 400 control
module, then the fan cannot be
switched on if the window is shut.
The indicator lamp will flash.
To select a power level
^
Use the – / + controls to select the
power level required.
The indicator lamps show which power
level has been chosen.
Depending on the intensity of the
cooking vapours, levels I to III (green
indicator lamps) are usually sufficient
for normal cooking.
When frying or cooking food with a
strong aroma, you may wish to select
the Intensive setting (yellow indicator
lamp) for a short period.
Pull the deflector plate right out to
achieve optimum extraction and to
prevent unnecessary noise levels.
To switch the fan off
^
Push the deflector plate back in. The
next time the deflector plate is pulled
out, the cooker hood will operate at
power level II again.
or
^ Press the On/Off touch control for the
fan
All the indicator lamps will go out.
To switch the lighting on
^ Pull out the deflector plate.
or
^
Press the touch control for the
lighting again.
When the lighting is switched on, the
indicator lamp lights up.
To switch the lighting off
^
Push the deflector plate back in.
or
^
Press the touch control for the
lighting.
The indicator lamp will go out.
Operation
13