Filter
Top Products
Automatically switching back the
intensive power level
The intensive level can be programmed
to automatically switch back to level 3
after 10 minutes.
^
To set this option, the fan and the
overhead lighting must be turned off
and the fume deflector pushed in.
^
Press and hold the "–" and "+" buttons
for approx. 10 seconds until power
level indicator 1 lights up.
^
Then press the following buttons one
after another :
– overhead lighting I,
– the "–" button, and
– overhead lighting I again,
If the indicators 1 and IS flash, the
automatic switch back is not activated.
^ To activate the automatic switch
back, press the "+" button.
The power level indicators 1 and IS
light continuously.
To deactivate, press the "–" button.
^
Press the On/Off button K to confirm.
^
If the procedure is not stored within 4
minutes, the hood will automatically
default to the "old" data.
Automatic Safety Shut-Off
If the ventilation system is left on, the
fan will turn automatically off 10 hours
after the last button was activated. The
lighting however will remain on.
^
Press the On/Off button K to turn the
fan back on again.
Operation
11