Filter
Top Products
, CAUTION: Before servicing,
disconnect the power supply by
either removing the fuse, shutting off
the power main or manually "trip
-
ping" the circuit breaker.
Do not clean or remove the warming
drawer until it has cooled.
Danger of burns!
Appliance front and control
panel
^
All external surfaces and controls can
be cleaned with warm water and
liquid dish soap applied with a
sponge.
^
Wipe dry using a soft cloth.
Glass
Glass surfaces can be cleaned with a
glass cleaner.
Stainless steel
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner.
Avoid the following on all surfaces:
- abrasive cleaning agents,
e.g. powder or cream cleansers,
- abrasive sponges,
e.g. pot scourers or sponges that
were used with abrasive cleaning
agents,
- oven sprays.
Warming drawer care
16