Filter
Top Products
Switching on
^
Open the drawer.
^
Switch the appliance on by touching the On/Off s sensor.
^
Touch the X sensor until the function required lights up in
the display.
^
If you wish to alter the temperature, touch the 6 sensor until
the LED for the temperature required lights up.
The appliance is set in continuous operation mode.
^
If you wish to limit the duration, touch the T sensor until
the duration (in hours) required lights up.
^
Close the drawer.
The drawer can be loaded once the necessary pre-heating
time has elapsed. If crockery has been warmed during the
pre-heating phase, use oven gloves to remove it.
Take care when opening and shutting the loaded drawer
that liquids do not spill over.
Switch the appliance off before removing food from the
drawer.
Operation
17