Filter
Top Products
^
Turn on the Ice/Water dispenser with
a finger touch to the control panel or
by passing your hand under the
dispenser to activate it via the light
sensor.
All of the touch controls for the
Ice/Water Dispenser should now
appear white.
If this is not the case, the Safety Lock is
activated i.e. "lock" will appear yellow.
See "Safety Lock".
If "lock" is blinking, the drip tray
needs to be emptied (see "Cleaning
and care")!
After activating the ice/water dispenser
it will take a few seconds for the water
and/or ice to be dispensed.
Dispensing water
^
Place a suitable cup on the drip tray.
^
Press and hold the "water" button.
As long as you hold in the "water"
button, water will flow from the
dispenser.
The water from the dispenser is
cooled to a palatable temperature. If
you would like the water colder,
place ice cubes in the glass before
dispensing water.
Dispensing (crushed) ice
^ Place a suitable cup on the drip tray.
^
Press and hold the "cubes" or
"crushed" button.
As long as you hold in the desired
button, ice will fall from the dispenser.
Release the button when the jar is
almost full. Ice in the discharge may
cause the cup to overflow or block
the discharge.
Ice/Water Dispenser
22