Filter
Top Products
^ Using a pencil mark a line down the
centre of the inside of the furniture
door.
^ Hang the fixing bracket with the
fitting aids a onto the inside side of
the furniture door. Align the fixing
bracket centrally.
^ Attach the fixing bracket securely
using at least 6 short4x14mmchip
board screws b. (On cassette doors
only use 4 screws on the edges).
^
Pull the fitting aids upwards to
remove them c.
^
Turn them round and insert them
right into the middle slots on fixing
bracket d.
^ Hang the furniture door onto
adjusting bolts a.
^ Loosely attach the nuts b on the
adjusting bolts.
^ Close the door and check the
distance between the door and
neighbouring furniture doors.
^ Align to match neigbouring doors if
necessary:
Side adjustments X are made by
sliding the furniture door, and height
adjustments Y by turning the
adjusting bolts a with a screwdriver.
^
Tighten the nuts b slightly.
Installing the appliance
37