Filter
Top Products
MasterCool control panel options for RemoteVision
Status indicators Description of function
Flashing ; ~ Module booting phase
Flashing ; ‡ Not connected to network
Flashing ; | Connection to network established, no IP address
assigned
Solid ; # Connected to network
Flashing ;< In Ad-Hoc Mode, not connected
Flashing ;= In Ad-Hoc Mode, connected
Selectable
options
Description of function
; - Back
; 2 Reboot the module
; 3 Reset to factory settings
; 4 Enter Ad-Hoc Mode
Note: If you cannot select any option (other than ; - "Back", the module has not
been installed correctly.
RemoteVision (optional accessory)
78