Filter
Top Products
Before using for the first time
^
Clean the inside of the appliance and
the accessories with luke warm water
and a little washing-up liquid, and
then dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.
Switching on
^ Using a coin, turn the On/Off dial in a
clockwise direction away from the "0"
position until the temperature display
lights up.
Forcing it beyond its range will
damage it. Turn it only as far as it will
go, then turn it back again.
The alarm indicator will light up. It will
go out when the temperature in the
freezer is cold enough.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
Cool pack
Place the cool pack in the top drawer
or, to save space, on the freezer tray.
The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
Switching off
^
Using a coin, turn the On/Off dial in
an anti-clockwise direction back to
the "0" position.
All the indicator lights will go out and
the cooling system will switch off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ switch the appliance off,
^ switch off at the wall socket and
withdraw the plug,
^
defrost and clean the appliance out,
and
^
leave the door ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
there is a danger of mould and
odours building up inside the
appliance.
Switching on and off
13