Filter
Top Products
^
With the door open, position cover e
in the front of the plinth fascia, and
push it firmly into position.
Refitting the handle:
^
Loosely screw the handle to the
opposite side of the door.
The mounting plate must fit snugly to
the door housing. If it doesn't:
^ Tighten the two screws a with the
allen key provided as far as they will
go.
^
Tighten screws b.
^
Slide the side section of the handle
into the guides on the mounting plate
until it clicks into place.
Changing the door hinging
38