Miele FN 12220 S Freezer User Manual


 
Before using for the first time
^
Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
Switching on
^
Press the On/Off button.
The temperature display and the alarm
indicator light will flash until the freezer
has cooled down to the correct
temperature for freezing.
To enable the temperature to get
sufficiently cold inside the appliance,
allow it to run for a few hours until it has
reached -18 °C before placing food in
it.
Cool pack
Place the cool pack in the top drawer. It
will be at its most effective after it has
been in the freezer for approx. 24 hours.
Switching off
^
Press the On/Off button until the
temperature display goes out.
All the displays will go out and the
cooling system will switch off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ switch the appliance off,
^ disconnect it from the mains,
^ clean the appliance out and
^ leave the door ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
there is a danger of mould and
odours building up inside the
appliance.
Switching on and off
12