Filter
Top Products
^ Unscrew upper hinge pin a using
the spanner supplied and refit on the
opposite side.
^ Using a screwdriver remove covers
b.
^ Refit covers b from the back on the
opposite side, and then click them
into place at the front
^
Remove cap c from door bearing
bush in the door and refit on the
opposite side.
^
Hang the door on hinge pin a and
then close the appliance door.
In the following illustration the door
is not shown in the closed position to
make it easier to see what happens
next.
^
Using a second person carefully tip
the appliance back and then fit hinge
pin b together with hinge bush c
from below into hinge plate e on the
left hand side.
^ Align the door with the appliance
housing using the long slot in hinge
plate e. Then tighten the screws.
^ Refit cover a on the left-hand side.
Changing the door hinging
36