Filter
Top Products
Faults in the water intake or water drain
Problem Possible fault Solution
The dishwasher
stops shortly after
the program starts.
The buzzer sounds.
The Intake/Drain
indicator light
alternates between
flashing and
remaining steady
when the door is
open.
The water supply
is closed.
–
Open the water supply all the way.
The dishwasher
has stopped.
The buzzer sounds.
The Intake/Drain
indicator light
flashes when the
door is open.
The time display
shows fault FXX.
Before fixing the fault:
– Press the K button to turn the
dishwasher off.
Fault F12/F13:
Water intake fault.
– Open the water supply all the way.
– Clean the screen in the water
supply valve (see User
"Maintenance instructions).
– The water pressure at the water
connection is less than 4.35 psi.
Consult a plumber.
Fault F11:
Water drainage
fault.
There might be
water in the wash
cabinet.
–
Clean the triple filter (see "Cleaning
and care").
–
Clean the drain pump (see "User
maintenance instructions").
–
Clean the non-return valve (see
"User maintenance instructions").
–
Remove any kinks or high loops in
the drain hose.
Frequently Asked Questions
38