Filter
Top Products
Problems water intake/drain
Issue Possible fault Solution
The "Intake/Drain"
indicator flashes and
lights alternately.
The water supply is
closed.
Open the water supply all the
way.
The dishwasher stops
running.
The "Intake/Drain"
indicator flashes.
Before fixing the fault:
–
Turn the dishwasher off s.
Fault in the water
intake.
–
Open the water supply all the
way.
–
Clean the water intake filter,
see "User Maintenance
Instructions".
– The water pressure at the
water connection is lower
than 4.35 psi. Consult a
plumber.
Fault in the water
drain.
There may be water in
the wash cabinet.
– Clean the triple filter.
– Clean the drain pump and
the non-return valve.
See "User Maintenance
Instructions" for more
information on the above.
–
Remove any kinks in the
drain hose.
Frequently asked questions
30