Filter
Top Products
With the aid of the following guide, minor problems can be fixed without a service
call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Issue Possible fault Solution
The Start/Stop indicator
does not flash after the
dishwasher is turned on
with s.
The machine is not
plugged in.
Insert the plug.
The fuse has tripped. Reset the circuit breaker.
Make sure it is a 15 A
breaker.
The dishwasher stops
during a program.
The fuse has tripped. Reset the circuit breaker.
Make sure it is a 15 A
breaker.
The program cycle
indicators "Rinse",
"Drying" and "End"
flash at the same time.
There may be a technical
fault.
– Turn the dishwasher off
s.
After a few seconds:
– Turn the dishwasher
on.
–
Select the desired
program with the
program selector
button.
–
Press the "Start/Stop"
button.
If the problem persists,
call Technical Service.
The drain pump is
running when the door
is open.
The waterproof system
has activated.
–
Turn off the water
supply.
–
Call Miele Technical
Service.
Frequently asked questions
29