Filter
Top Products
Delay start
The starting time of a program can be
delayed. The start time can be delayed
from 30 minutes to 24 hours.
With a delay start time between 30
minutes and 9 hours 30 minutes the
delay is set in 30 minute increments.
For 10 hours or more it is set in one
hour increments.
When using the "Delay Start"
function, make sure that the
detergent compartment is dry before
adding detergent. Wipe dry with a
cloth if necessary. Otherwise the
detergent could stick together and
not completely rinse out.
Gel detergent should not be used
when selecting "Delay Start", the
detergent could leak out of the
compartment.
^ Open the door.
^ Turn the dishwasher on "g".
The indicator "g" lights.
^
Select the desired program with the
"Program" button.
^
Press the "d" button.
The last set delay start time will show in
the time display. The indicator "d"
lights.
^
Set the desired delay start time with
the "d" button.
If you press and hold the "d" button the
time with automatically count up to 24^.
To start again at 30 minutes, press the
"d" button twice.
^
Close the door.
The time will count down to the
program start: in 1-hour-steps over
10 hours, in 1-minute-steps under
10 hours.
Once the delay start time has elapsed,
the selected program starts. The
display shows the remaining time, the
indicator "d" goes out and the indicator
of the selected program lights.
Delay start display
Up to 59 minutes: e.g. 30 minutes = 30
Between1hand9h30min:
e.g. 5 hours = 5.00
10 hours and over: e.g. 15 h = 15^
Starting a program before the delay
start has elapsed
A program can be started before the
delay start time has elapsed.
^ Open the door.
^ Press the "o" button.
^
Press the "g" button.
^
Select the desired program with the
"Program" button.
^
Close the door.
The optical control lights. The program
begins.
Additional options
33