Filter
Top Products
With the aid of the following guide, minor problems can be fixed without a service call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Issue Possible fault Solution
After the dishwasher
was turned on the
display stays off and the
stand by indicator does
not flash.
The machine is not
plugged in.
Insert the plug.
The fuse has tripped. Reset the circuit breaker.
See data plate for
minimum amperage.
The dishwasher stops
during a program.
The fuse has tripped. Reset the circuit breaker.
See data plate for
minimum amperage.
The buzzer sounds.
The display shows the
following:
Technical fault FXX
Call Technical Service
There may be a technical
fault.
– Turn the dishwasher off
by touching the s
control.
After a few seconds:
– Turn the dishwasher
on.
–
Select the desired
program.
–
Select Start.
If the problem persists,
contact Technical
Service.
The buzzer sounds. The
display shows the
following:
Fault Waterproof F70
The waterproof system
has activated.
–
Turn off the water
supply.
–
Contact Miele
Technical Service.
Frequently asked questions
53