Filter
Top Products
Problems water intake/drain
Issue Possible fault Solution
The optical interface
flashes fast, the buzzer
sounds and the display
shows the fault:
No water intake
The water supply is
closed.
Open the water supply all
the way.
Fault water intake FXX
Before fixing the fault:
–
Turn the dishwasher off
o.
Fault F12/F13:
Fault in the water intake.
–
Open the water supply all
the way.
– Check and clean the
water intake filter, see
"User Maintenance
Instructions".
– The water pressure at the
water connection is lower
than 4.35 psi. Consult a
plumber.
Frequently asked questions
54