Filter
Top Products
At the end of a program
^
Open the door a few inches to see if
the program has finished.
In the "Express" program, the drying
fan will run for a few minutes after
the program is completed.
The indicator of the selected program
has gone out.
If the program indicator is still on,
the program is still running. Close
the door again to allow the program
to finish.
Keep the door open slightly. The dishes
will cool much faster.
^ Unload the dishwasher.
Unloading the lower basket first will
prevent water drops from the upper
basket and cutlery tray (depending on
model) from dropping onto dishes in
the lower basket.
^
Turn the dishwasher off "V".
The dishwasher continues to use
electricity until turned off with the
"o" button.
If the dishwasher is not used for a
longer period of time, e.g. vacationing,
turn off the water supply.
Interrupting a program
A program is interrupted as soon as the
door is opened. If the door is closed,
the program will continue from where it
was interrupted.
,
Open the door with care. The
water in the dishwasher is hot.
Danger of scalding. Before closing
the door again, leave it ajar for
approx. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks into place.
Changing a program
If the detergent flap is already open,
do not change the program.
If a program has already started and
you wish to change it:
^ Open the door.
^ Press the "o" button.
^
Press the "g" button.
^
Select the desired program with the
program button.
^
Start the program by closing the
door.
Use
27