Filter
Top Products
Program sequence indicator
After a program has started, the
program sequence indicator displays
the respective program step.
At the end of a program
The program has ended when a 0
appears in the time display and "End"
lights up in the program sequence
display.
If the Express program was
selected, the drying fan will run for a
few minutes after the program has
ended.
^ Open the door.
^ Press the K button to turn the
dishwasher off.
The dishwasher will continue to use
electricity until it is turned off with the K
button.
,
If you would like to open the
door at the end of the program, then
make sure that you open the door
fully. Otherwise steam from the
dishwasher could damage the edge
of the counter top because the fan is
no longer running.
^ Unload the dishwasher.
Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
The dishes will cool much faster if you
open the door when the program has
ended.
Unload the lower basket first, then the
upper basket and then the cutlery tray
(depending on the model).
This will prevent water from the upper
basket and cutlery tray from dripping
onto dishes in the lower basket.
Preparing your appliance for
an extended vacation
If you elect to turn off the water to your
home for an extended period of time,
please note that this may not be
enough to reduce the risk of a leak.
To be completely safe, you must
turn off the water supply to each
individual appliance. This means
under the sink for a dishwasher, at
the laundry bib for your washer, etc.
Use
38