Filter
Top Products
General problems with the dishwasher
Problem Possible fault Solution
The time display is
dark.
Only the Start/Stop
indicator light flashes
slowly.
The dishwasher has gone
into Standby mode to save
energy.
Press any button to come
out of Standby.
There are detergent
residues in the
dispenser at the end of
a program.
The dispenser was wet
when detergent was
added.
Make sure the dispenser is
dry before adding
detergent.
The detergent
dispenser flap cannot
be closed properly.
Detergent residue is
blocking the latch.
Remove the detergent
residue.
The inside of the door
and/or the interior
walls are wet after a
program has finished.
This is normal! None.
The moisture evaporates
after some time.
There is water in the
wash cabinet at the
end of a program.
Before fixing the fault:
– Press the K button to
turn the dishwasher off.
The triple filter in the wash
cabinet is clogged.
Clean the triple filter (see
Cleaning and care).
The drain pump or
non-return valve is
blocked.
Clean the drain pump or
the non-return valve (see
User maintenance
instructions).
There is a kink in the drain
hose.
Remove the kink.
Frequently asked questions
47