Miele G 5770 Dishwasher User Manual


 
General problems with the dishwasher
Problem Possible fault Solution
The indicators and the
display is dark. Only
the "Start/Stop" K
indicator flashes
slowly.
The display goes into
"Standby" mode to save
energy
Press the K button.
Standby is ended.
Detergent residue is left
in the dispenser at the
end of a program.
The dispenser was
damp when detergent
was added.
Dry the dispenser before
adding detergent.
The detergent
dispenser lid cannot be
closed properly.
Detergent residue is
blocking the catch.
Remove the residue.
The door and the
interior walls are still
wet after a program has
finished.
This is not a fault.
It is the normal
operating mode of the
drying system.
The moisture will evaporate
after a short time.
Water remains in the
wash cabinet at the end
of a program.
Before fixing the fault:
Press the K button to turn
the dishwasher off.
The triple filter in the
wash cabinet is
clogged.
Clean the triple filter (see
"Cleaning and care").
The drain pump or the
non-return valve may
be blocked.
Clean the drain pump and
the non-return valve (see
"Cleaning and care").
The drain hose is
kinked.
Remove any kinks from the
drain hose.
Frequently Asked Questions
50