Filter
Top Products
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Problem Possible fault Solution
After the dishwasher was
turned on with the K
button, the display stays
off and the "Start/Stop"
indicator does not flash.
The machine is not
plugged in.
Insert the plug.
The circuit breaker has
tripped.
Reset the circuit breaker.
See the data plate for
minimum amperage.
The dishwasher stops
during a program.
The circuit breaker has
tripped.
– Reset the circuit breaker
(see the data plate for
minimum amperage).
– If the circuit breaker
trips again. Contact
Miele.
One of the following
faults appears on the
display:
Before fixing the fault:
– Press the K button to
turn the dishwasher off.
; Fault FXX
There may be a
technical fault.
After a few seconds:
–
Turn the dishwasher on.
–
Select the desired
program.
–
Press the Start/Stop
button.
If the fault is indicated
again, a technical fault has
occurred.
–
Contact Miele.
L Waterproof
The waterproof system
has activated.
–
Turn off the water
supply.
–
Contact Miele.
Frequently Asked Questions
48