Filter
Top Products
Rinse aid
For best results the rinse aid dosage
can be adjusted.
The dosage can be set between 0-6 ml.
The factory default dosage setting is
3 ml rinse aid.
If spots appear on the dishes:
–
Use a higher setting for rinse aid.
If smearing or streaking show:
–
Use a lower setting for rinse aid.
^
Select the desired rinse aid amount
and confirm with the center button.
Drying Plus
The Drying Plus function automatically
opens the door slightly at the end of a
program with a drying phase (except
"Extra quiet"), in order to improve the
drying process. (see the "Program
guide").
This function can also be deactivated.
^
Select the desired setting and
confirm with the center button.
,
If you have deactivated the auto
-
matic door opening function but
would still like to open the door at
the end of the program, then make
sure that you open the door fully.
Otherwise steam from the
dishwasher could damage the edge
of the counter top because the fan is
no longer running.
Settings menu
44