Filter
Top Products
Drying Plus
The Drying Plus function automatically
opens the door slightly at the end of a
program with a drying phase (except
"Extra quiet"), in order to improve the
drying process. (see the "Program
guide").
This function can also be deactivated.
^
Select the desired setting and
confirm with the center button.
,
If you have deactivated the auto
-
matic door opening function but
would still like to open the door at
the end of the program, then make
sure that you open the door fully.
Otherwise steam from the
dishwasher could damage the edge
of the counter top because the fan is
no longer running.
Optimize standby
A few minutes after the last key is
pressed or at the end of the program
the dishwasher will switch into Standby
mode to save energy. The display and
the indicators are turned off and only
the K indicator light flashes slowly.
If the dishwasher is not turned off after
the program ends, it will turn
completely off after a few minutes in
standby mode.
This function can also be turned off.
The display and the indicators stay on
and the dishwasher will turn off after
approx. 6 hours.
^ Select the desired setting and press
the center button.
If refill salt and/or rinse aid or a fault
are present in the display, the
dishwasher will not turn off.
The refill messages can be turned
off when you use a tab detergent.
Fault messages cannot be turned
off.
Settings menu
45