Filter
Top Products
Problem Possible fault Solution
Detergent is left in the
dispenser at the end
of a program.
The dispenser was damp
when detergent was
added.
Dry the dispenser before
adding detergent.
The detergent lid
cannot be closed
properly.
Detergent residue is
blocking the catch.
Remove the residue.
The door and the
interior walls are still
wet after a program
has finished.
This is not a fault! It is the
normal operating mode of
the drying system.
The moisture will evaporate
after a short time.
Water remains in the
wash cabinet at the
end of a program.
Before fixing the fault:
–
Turn the dishwasher off
K.
The triple filter in the wash
cabinet is clogged.
Clean the triple filter. See
"User Maintenance
Instructions".
The drain pump or the
non-return valve may be
blocked.
Clean the drain pump and
the non-return valve, see
the "User Maintenance
Instructions".
The drain hose is kinked. Remove any kinks from the
drain hose.
Frequently asked questions
64