Filter
Top Products
Problem Possible cause Remedy
Dishes and glasses are
not dry or are flecked.
The rinse aid amount may
be insufficient or the rinse
aid reservoir empty.
Increase the dosage or
replenish the reservoir,
see "Before using for the
first time".
Crockery was taken out of
the cabinet too soon.
Leave it in for longer, see
"Operating the
dishwasher".
White residue is visible
on cutlery and crockery,
clouding occurs on
glassware; film can be
wiped off.
Not enough rinse aid was
used.
Increase the dosage, see
"Before using for the first
time".
There is no salt in the salt
reservoir.
Add dishwasher
reactivation salt, see
"Before using for the first
time".
The salt reservoir cap has
not been screwed on
correctly.
Replace it making sure it
screws back on correctly.
The water softener is
programmed to a setting
which is too low.
Programme a higher
setting, see "Before using
for the first time".
Combination dishwasher
detergent tablets
containing rinse aid
and/or salt may have
been used. These are
unsuitable as long term
use can impair the
softener unit.
Use a standard liquid,
tablet or powder
detergent.
Smearing appears on
glassware and cutlery,
there is a bluish sheen
on the surface of
glassware; film can be
wiped off.
The rinse aid dosage is
set too high.
Reduce the dosage, see
"Before using for the first
time".
Problem solving guide
49