Filter
Top Products
Extended drying
If the desired drying results are not con
-
sistently achieved, the turbothermic
cooling fan can be programmed to run
an extra 14 minutes at the end of each
program.
The "Extended drying" feature can also
be activated to prevent condensation
from collecting on the steam deflector.
Turning extended drying on/off
^
Turn off the dishwasher.
^
Turn the program selector to "Stop".
^ Press and hold the "Top Solo" button
and at the same time turn the dish-
washer on using the "On/Off" button.
Release the "Top Solo" button within
two seconds.
The "Salt" indicator will flash.
If the "Rinse aid" indicator comes on,
the rinse aid dispenser needs to be re-
filled.
If any other indicator is lit or flashing,
the above steps must be repeated.
^
Turn the program selector to the
"9 o’clock" position.
If the "Top Solo" indicator is not lit:
the extended drying time is off.
If the "Top Solo" indicator is lit:
the extended drying time is on.
If the correct drying time is set:
^
Turn off the dishwasher.
If the drying time is incorrect:
^ Press the "Top Solo" button, to
change the setting.
According to the previous setting the
"Top Solo" indicator goes on or off.
^ Turn the program selector to "Stop".
The changed extended drying option is
stored.
^ Turn off the dishwasher.
Operation
35