Filter
Top Products
What if … Possible fault Fix
the "Intake/Drain"
indicator is lit or
flashing and the
dishwasher may have
stopped?
The water valve is closed. Open the water valve.
The filter in the water inlet
is blocked.
See maintenance
instructions.
The flow pressure at the
water inlet is less than
4.5 psi (0.3 bar).
Contact a plumber.
The waterproof system
has activated.
Call the Miele Technical
Service Department.
the "Intake / Drain"
indicator flashes and the
program stops?
Water intake error.
–
Turn off the dishwasher
before fixing a problem.
–
Open the water valve.
–
Check and clean the
water intake filter, see
maintenance
instructions.
– The flow pressure at the
water inlet is less than
4.5 psi (0.3 bar).
Contact a plumber.
Drain error, water left in
the wash cabinet
– Turn off the dishwasher
before fixing a problem.
– Clean the triple filter,
see maintenance
instructions.
–
Clean the drain pump
and the non-return
valve, see maintenance
instructions.
–
Remove any kinks in
the drain hose.
Frequently asked questions
39